Contents

Tools

Converter

Convert between common diving units for pressure, temperature, volume, depth, weight, and breathing rate, in both directions, independent of your app settings.

Last updated October 30, 2026

Free web calculator: Dive Unit Converter →

On this page

What it is

Divers around the world mix unit systems. Your boat briefing might be in metres while your cylinder is stamped in PSI and your buddy’s computer reads feet. The Converter does quick, two-way conversions across the units you actually use underwater, so you can translate a number without doing the arithmetic on a wet slate.

It works in six categories: pressure, volume, depth, temperature, weight, and SRMV/SAC (surface respiratory minute volume / surface air consumption), the breathing-rate category.

How to use it

  1. From the Plan tab, open Converter.
  2. Pick a category from the buttons at the top: Pressure, Volume, Depth, Temperature, Weight or SRMV/SAC.
  3. You get two cards, each with a unit selector and a number field with − and + buttons. The card you typed in last has a blue outline and reads Your value. The other reads Converted with a small auto tag: it follows your value.
  4. Type a value into either card, or step it with − and +. The other card updates as you go, and the captions move to the card you are typing in.
  5. Change the unit on a card and that card’s value converts into the new unit. The other card stays as it was.
  6. Tap the swap button between the cards to trade them, units and values. With bar on top, one tap puts PSI on top. Picking the unit the other card already shows does the same swap, so the two cards never show the same unit.

One muted line under the converted value shows the factor behind it, for example “1 bar = 14.5038 PSI”. Temperature shows the formula instead (“°F = °C × 1.8 + 32”). Depth adds “length, not pressure”: the converter changes metres to feet, it does not work out the water pressure at a depth.

Figures show at most 2 decimal places, with trailing zeros dropped, so 200 bar reads 2900.75 PSI and 25 °C reads 77 °F. The converter keeps the full value behind the display, so switching a unit and back never drifts.

Every category starts at 0 as its lowest value except temperature, which stops at absolute zero in each unit: −273.15 °C, −459.67 °F and 0 K. At that point the − button turns dashed and the bar reads “Absolute zero, the lowest value”. Step sizes depend on the unit, for example 0.1 for cubic feet, ft³/min and weight.

Categories and units

CategoryUnitsDefault value
Pressurebar, PSI, MPa200 bar
VolumeL, ft³12 L
Depthm, ft30 m
Temperature°C, °F, K25 °C
Weightkg, lbs15 kg
SRMV/SACL/min, bar/min, ft³/min20 L/min

SRMV/SAC mode needs a cylinder size

Breathing rate is special. A pressure-based rate in bar/min depends on the cylinder you are breathing from, because the same air consumption drops the pressure faster in a small cylinder than a large one. So when one side of an SRMV/SAC conversion is set to bar/min, an extra Cylinder volume row appears inside that card. Fill that in and the tool can convert between volume-based rates (L/min, ft³/min) and pressure-based rates (bar/min) correctly.

The cylinder volume is the cylinder’s water volume. It starts at 12.2 L (a common steel cylinder) and its unit follows the volume side: litres when the other card is L/min, cubic feet when it is ft³/min (12.2 L shows as 0.43 ft³). The bar then says what the rate means, for example “20 L/min takes 1.66 bar a minute from 12.2 L”.

Behaviour and limits

On a tablet the two cards sit side by side, with the swap button between them.

The Converter is a standalone scratchpad. It does not read or change your app-wide unit setting (the metric or imperial preference that controls how the other tools display depth, pressure, and so on). Converting here never alters how the Deco Planner or any other screen shows its numbers.

It is a conversion aid, not a gas-planning tool. For breathing-rate planning that ties into a real dive, use the SAC/SRMV calculator and the gas tools instead.

  • Deco Planner does full multi-gas dive planning where you will read converted numbers in context.

Parts of this guide were drafted with AI assistance and may contain mistakes. It's educational, not a substitute for training. Always dive within your certification and verify with your instruments.