Tools
Checklists
Build and run dive checklists with timers and note fields. Comes with a recreational BWRAF check, an open-circuit tech predive, JJ-CCR and FX CCR phases, GUE CHAOS and EDGE, TDI START, a tech dive-plan review, and post-dive presets.
Last updated October 30, 2026
On this page
What it is
Checklists is a free tool for the routines you run around a dive: building a rebreather, final checks before you splash, the team check, rinsing gear afterwards. You can write your own checklists from scratch or start from thirteen built-in presets. Steps can carry a timer (for holds like a negative pressure test) and a text field (for values like cell mV readings), and everything you check off is saved on the spot, so a half-finished build survives closing the app.
Rebreather Forum 3, the industry’s consensus meeting on rebreather safety, called checklist use the single most important action divers can take to improve safety. It also found that many divers stop using checklists after their first fifty hours or so. This tool exists to make keeping the habit cheap.
The presets
The tool starts empty; what you see first is a one-line New to Checklists? Guide tip (tap it for the tutorial, ✕ to hide it for good) and a button to browse the presets. Once you have checklists, a Browse presets row sits under them. The catalog (also under Create Checklist → From a preset) holds thirteen templates. Each one lists its sections and steps, and how many countdowns and note fields it has. Tapping one adds it to your list straight away, as an ordinary checklist: rename it, edit it, delete it. The catalog always keeps the original, so you can take a fresh copy any time.
| Preset | What it covers |
|---|---|
| Predive safety check (BWRAF) | The recreational buddy check: BCD, Weights, Releases, Air, Final check |
| Open-circuit tech predive | Analyze and assemble, wing and regulator pressure tests, head-to-toe team match |
| JJ-CCR preparations on land | Full build: supplies, assembly, system checks, positive and negative tests, calibration, pre-breathe |
| JJ-CCR shortly before diving | Final checks at the water: valves, ADV, DSV, leak test, setpoints, pre-breathe |
| JJ-CCR after entering the water | Surface checks after splash: bubble check, displays, equipment |
| FX CCR functionality check | Building the unit, items 1 to 13 of the Sub-Gravity sheet: cylinders, mushroom valves, scrubber, cell mV and calibration, negative and positive tests, ADV, BOV and MAVs, leak test, batteries, computer settings, pre-breathe |
| FX CCR pre-dive checks | At the water, items 14 to 20: pos/neg done, weighting, displays, valves, setpoint and loop contents, don the unit, pre-jump drill |
| FX CCR after the dive | Breaking the unit down: handset and HUD off, valves closed, rinsing, drying |
| CHAOS (GUE) | GUE’s rebreather check during the pre-breathe: Controller, HUD, ADV, O₂, Symptoms |
| GUE EDGE team pre-dive | The spoken team check: Goal, Unified team, Equipment, Exposure, Decompression, Gas, Environment |
| TDI START team pre-dive | TDI’s team check before a tech dive: S-drill and bubble check, Team equipment, Air (gas matching and MOD), Route, Tables |
| Tech dive plan review | Talk through the plan: mission, logistics, narcosis, gas, decompression, oxygen, thermal |
| Post-dive and cleaning | Pressures and scrubber time used, rinsing, disinfecting, drying, batteries |
Running a checklist
- Tap a checklist on the Checklists page.
- Tap a step to check it off; the whole row is the target, not only the box. Each check stores a small timestamp (“2m ago”) so you can see when you did what. A checked step hides its details to save room; uncheck it to see them again.
- Each section is a card. Its header shows the state with a mark and a count: an empty ring when untouched, a half ring while in progress, a filled check when done. A folded section shows its count under its name.
- The grey block at the top stays in view. It shows how many steps you have checked, a bar with one segment per section (sized by the section’s step count, filling in as you work), and how many sections are done. Tap (i) for a reminder of what the bar means.
- When you check the last step of a section, the section folds away so the next one moves up. A checklist you reopen starts with its finished sections folded. Tap a section header to fold or unfold it.
- When the last step is checked, the app confirms the checklist is complete.
- Reset (at the end of the list, or the ⋯ menu) clears all checks, timers and notes after a confirmation.
On an iPad held sideways, the progress block and a list of sections sit on the left. Tap a section there to jump to it.
Progress persists across app restarts. Reopen the app and the checklist is exactly where you left it.
Timers and notes
A step with a countdown shows the remaining time, with Start (or Pause) and Reset buttons beside it, and signals when it reaches zero, with a vibration: the time turns green and reads “Finished”. Countdowns follow the wall clock, not the app: if you close the app mid-count, the time keeps running, the same way your pressure test does. A step with a stopwatch counts up and leaves the judgment to you. Both keep their last value until you reset them.
When a countdown finishes while you are in another app or have the phone locked, Dive Kit sends a notification naming the step (for example, “Negative pressure test finished”). Tapping it opens that checklist and highlights the step. If you are already looking at that checklist when the countdown finishes, the notification is skipped (you see it finish on screen instead), and any earlier alert for it clears when you open the checklist. The first time you start a countdown, the app asks for permission to send notifications; if you decline, timers still work on screen, just without the alert.
A step with Notes gives you a place to write values you would otherwise put on a slate: cell millivolts, gas analysis, cylinder pressures. The field is always labelled “Notes” and grows to fit several lines, so a longer entry wraps instead of scrolling sideways.
Checking a step locks its features so a wet thumb cannot change them: the timer controls disappear (the final time stays visible, marked “Locked”) and the note becomes read-only (“No note recorded” if you left it empty). Unchecking the step brings the controls back.
Creating and editing
- Tap Create Checklist, then Start blank or From a preset. A preset is added to your list immediately, so you only need the editor if you want to change it. Start blank opens the editor right away.
- In the editor, give the checklist a name and an optional description.
- Each section shows its steps as tiles. Tap a section’s title row (or its ⌃) to fold it to one card with its name and step count, and tap the card to unfold it. Folding keeps a long checklist short while you work on one part; the folds last until you leave the editor. Tap a tile to edit the step: its label and details, a timer (countdown with a length from 10 seconds to 60 minutes in steps of 10 seconds, or a stopwatch), and Notes. The changes stay when you tap Done or swipe the sheet away. Delete step is at the bottom of the same sheet.
- Add step opens the same sheet for a new step; tap Add Step to add it, or Cancel. Add section adds a section at the end.
- The ⋯ next to an unfolded section renames it, moves it up or down, or deletes it (with its steps, after a confirmation).
- Switch to Reorder at the top to move sections and steps with up and down arrows. Switch back to Edit to change text, timers and notes.
- Save Checklist commits everything. Cancel, or going back, asks whether to discard your edits.
Editing a checklist that has progress (checks, notes, or a running timer) asks you to confirm first, because saving the edit resets that run. If you leave the editor without saving, the run stays as it was.
To rename a checklist without editing it, pick Rename from its ⋯ menu on the Checklists page. Renaming keeps your progress.
To duplicate a checklist (for a second unit, a different site, a teammate’s variant), pick Duplicate from a checklist’s ⋯ menu, give the copy a name, and it opens in the editor. Progress is not copied.
Behaviour and limits
- Checklists live on your phone and work fully offline. There is no sync or sharing.
- The app stays on the boat. Memorize in-water checks before you splash and check them off afterwards.
- Saving an edit to a checklist with progress resets its run (you are asked first). Editing a checklist with no progress needs no confirmation.
- Deleting a checklist made from a preset never touches the catalog; you can recreate it any time from Create Checklist → From a preset.
Parts of this guide were drafted with AI assistance and may contain mistakes. It's educational, not a substitute for training. Always dive within your certification and verify with your instruments.